Plane Table Survey PYQs, GPSC Civil Engineering MCQs
A plane table is oriented by the A) Method of radiation B) Method of intersection C) Method of back sighting D) Method […]
Category: Recent Posts
Tacheometric & Trigonometric Survey PYQs, Surveying PYQs, GPSC Civil Engineering Previous Year Asked Questions
Which of the following is/are type(s) of telescope used in stadia surveying?i. simple external focusing telescopeii. external focusing anallactic telescopeiii. internal focusing […]
Theodolite Survey PYQs, Surveying PYQs, GPSC Civil Engineering Previous Year Asked Questions
The vertical circle of a theodolite is generally graduated in A) the quadrantal system from 0 to 90° in the four quadrants […]
Contouring PYQs, GPSC Civil Engineering Previous Year
Contour lines close together indicate _____ slope. A) Steep B) Gentle C) Uniform D) Undulated Which one of the following statement is […]
Levelling PYQs, Surveying PYQs, GPSC Civil Engineering Previous Year Asked Questions
Direct method of levelling is also known as A) barometric levelling B) hypsometric levelling C) hydrographic levelling D) spirit levelling Seven readings […]
Compass Survey PYQs, GPSC Civil Engineering MCQs
The departure of a line of a traverse is A) the deviation in the alignment of the line B) the projection of […]
Chain & Tape Survey PYQs, Surveying PYQs, GPSC Civil Engineering Previous Year Asked Questions
Ranging of a survey line means A) placing a line on the ground along the shortest distance between two points B) placing […]
Fundamental Concepts of Surveying PYQs, Surveying PYQs, GPSC Civil Engineering Previous Year Asked Questions
Basic principle of Surveying “working from whole to part” is: A) to complete the work rapidly B) to prevent accumulation of errors […]
Surveying PYQs, GPSC Civil Engineering Previous Year Asked Questions
Surveying PYQs, GPSC Civil Engineering Fundamental Concepts of Surveying PYQs Chain & Tape Survey PYQs Compass Survey & Traversing PYQs Levelling PYQs […]
Hydraulic Pump PYQs, Fluid Mechanics PYQs, GPSC Civil Engineering Previous Year Asked Questions
Before starting the centrifugal pumps, usually they require priming. Priming is the process of A) removing the trapped air from the pump […]
