4 Measure To Reduce Evaporation Losses From Reservoir
Measure to reduce evaporation losses from reservoir 1. Surface area reduction If the exposed surface area is reduced the evaporation can be […]
Author: Er. Mr. M. V.
Isohyetal Method – 3 Methods To Calculate Average Rainfall Free
Here you will get all details about Isohyetal Method and other Various methods of calculating average rainfall over area. There are several […]
Evaporation And Factors Affecting Evaporation
Here we given detail definition of evaporation. Here you will also study about Factors affecting evaporation. We have included many factors that […]
Infiltration capacity, Infiltration rate And Rainfall excess
(i) Infiltration capacity Infiltration capacity (f) is the maximum rate at which a soil is capable of absorbing water in a given […]
Geo-technical Engineering PYQs, GPSC Civil Previous Year
1. As per Jacky formula, Ko (coefficient of earth pressure at rest) is determined as : A) Ko = 1 – cosφ […]
Geo-technical Engineering PYQs, GPSC Civil Engineering
1. The adsorbed film of water A) affects the physical properties of fine grained soils B) allows the clay particles to deform […]
Building Materials PYQs, GPSC Civil Previous Year Asked Questions
1. The strength of concrete mainly depends on A) quality of course aggregate B) water cement ratio C) fineness of cement D) […]
Building Materials PYQs, GPSC Civil Previous Year Questions
1. The strength of Class-II bricks used in construction shall not be less then A) 50 kg/cm² B) 75 kg/cm² C) 35 […]
Environmental Engineering PYQs, GPSC Civil Previous Year
1. High turbidity of water can be determined by A) Turbidity Tube B) Baylis turbidimeter C) Hellipe turbidimeter D) Jackson turbidimeter Check […]
Building Materials PYQs, GPSC Civil Engineering Previous Year
1. As per BIS 1077-1957, the minimum crushing strength of bricks should be A) > 2.5 MPa B) > 3.5 MPa C) […]
