Fluid Dynamics PYQs, GPSC Civil Engineering Previous Year
In a venturimeter installed in a horizontal pipe the pressure is maximum at A) Entry point of convergent section B) Midpoint of […]
Category: Civil Engineering MCQs
Fluid Pressure and Its Measurement PYQs, GPSC Civil MCQs
Bourdon gauge measures A) Absolute pressure B) Gauge pressure C) Local atmospheric pressure D) Standard atmospheric pressure In order to have a […]
Fluid Mechanics PYQs, GPSC Civil Engineering Previous Year
Fluid Mechanics PYQs, GPSC Civil Engineering Properties of Fluids PYQs Dimensional & Model Analysis PYQs Fluid Pressure and Its Measurement PYQs Fluid […]
Geo-technical Engineering PYQs, GPSC Civil Previous Year
1. As per Jacky formula, Ko (coefficient of earth pressure at rest) is determined as : A) Ko = 1 – cosφ […]
Geo-technical Engineering PYQs, GPSC Civil Engineering
1. The adsorbed film of water A) affects the physical properties of fine grained soils B) allows the clay particles to deform […]
Building Materials PYQs, GPSC Civil Previous Year Asked Questions
1. The strength of concrete mainly depends on A) quality of course aggregate B) water cement ratio C) fineness of cement D) […]
Building Materials PYQs, GPSC Civil Previous Year Questions
1. The strength of Class-II bricks used in construction shall not be less then A) 50 kg/cm² B) 75 kg/cm² C) 35 […]
Environmental Engineering PYQs, GPSC Civil Previous Year
1. High turbidity of water can be determined by A) Turbidity Tube B) Baylis turbidimeter C) Hellipe turbidimeter D) Jackson turbidimeter Check […]
Building Materials PYQs, GPSC Civil Engineering Previous Year
1. As per BIS 1077-1957, the minimum crushing strength of bricks should be A) > 2.5 MPa B) > 3.5 MPa C) […]
Solid Mechanics PYQs, GPSC Civil Previous Year Questions
1. In Mohr’s diagram, a point above the Mohr’s envelope indicates A) imaginary condition B) safe condition C) imminent failure condition D) […]
