2 votes, 5 avg

100

AMC Sahayak Technical Supervisor Old Paper Test 2024 (Exam Date :- 18/08/2024)

-: Symbols & Description :-

(નિશાનીઓ અને તેનું વર્ણન)

-: Instructions :-

(સૂચનાઓ)

1. Click On Full Screen Mode (¤) From Corner For Best Test Experience

(બેસ્ટ ટેસ્ટ અનુભવ માટે ખૂણામાં આપેલ ફૂલ સ્ક્રીન મોડ (¤) ઉપર ક્લિક કરો)

2. Use Navigation Bar For Jumping Forward or Backward To Any Question

(કોઈ પણ પ્રશ્ન ઉપર જવા માટે નેવિગેશન બારનો ઉપયોગ કરવો)

3. Submit Test Button Will Be Only Visible At The Last Question

(ટેસ્ટ સબમિટ કરવાનો ઓપ્શન માત્ર છેલ્લા પ્રશ્ન ઉપર હશે)

4. Don't Forget To Give Your Rating & Review At The End Of Test

(ટેસ્ટ પૂરી થયા પછી રેટિંગ & રિવ્યુ આપવાનું ભુલશો નહીં)

"BEST OF LUCK"

[Click On Full Screen Mode (¤) From Corner For Best Test Experience]

(બેસ્ટ ટેસ્ટ અનુભવ માટે ખૂણામાં આપેલ ફૂલ સ્ક્રીન મોડ (¤) ઉપર ક્લિક કરો)

---------------

Your Name

1 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

The horizontal distance between two parallel main reinforcing bar shall not be less than

2 mm more than the nominal maximum size of coarse aggregate

3 mm more than the nominal maximum size of coarse aggregate

4 mm more than the nominal maximum size of coarse aggregate

5 mm more than the nominal maximum size of coarse aggregate

2 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which is a type of process in the development of crack due to sulphate attack?

Mechanical process

Physico-chemical process

Alkaline process

Acidic process

3 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

The area covered by a building on all floors including the cantilever portion, wall and column etc is known as

Floor area

Carpet area

Built-up area

Plot area

4 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which statement is incorrect in relation of index properties of soil?

The value of water content can not be greater than 100%

The fine-grained soil has greater void ratio than coarse grained soil

The porosity can not be greater than 1

The void ratio can be greater than one

5 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

If Bp is the size of plate, What would be the size of pit to conduct plate load test at the site?

Bp x Bp

2Bp × 2Bp

4Bp × 4Bp

5Bp × 5Bp

6 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

The maximum permissible building height regulated in accordance to

Margin/open spaces within the plot

The width of the road on which it adjoins and zone

Distance between two side by side buildings

Floor space index and allowable ground coverage

7 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which is not a method of origin and destination study?

License plate method

Road side interview method

Passenger car method

Return post card method

8 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which of the following is used in to determine the shear strength of soil in field?

Box shear test

Vane shear test

Tri-axial shear test

Unconfined compression test

9 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

A tacheometer is fixed at a point A. The lower, middle and upper hair readings on a staff located at point B were 0.5 m, 0.75 m, and 1.0 m respectively. What is the distance AB?

25 m

50 m

100 m

125 m

10 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

The span in which the total cost of the substructure is equal to the total cost of superstructure is termed as

Balanced span

Economical span

Cantilever span

Central span

11 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

The amount of cement required in 12 mm thick plastering in 1: 4 cement mortar is (per 100 m² area)

4 m³

0.4 m³

2 m³

1.6 m³

12 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which statement is not true in case of dowel bars and tie bars in cement concrete roads ?

The diameter of the dowel bar and spacing between them are designed such that a group of dowel bars can transfer 40% of the design axle load.

Tie bars are used across the longitudinal joints of cement concrete pavements.

The tie bars are designed to act as load transfer devices.

The bearing stress in the concrete also depends upon the diameter of dowel bar.

13 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

The vertical circulation among the floors in a building is provided by

Door

Windows

Corridors

Stairs

14 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

The location of point of maximum bending moment in case of a simply supported beam loaded with uniformly distributed load throughout the span will be

At left hand support

At right hand support

At centre

Anywhere in the span

15 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

A simply supported beam is subjected to a couple at the centre the shape of shear force diagram will be

Rectangle

Triangle

Trapezium

Parabolic

16 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Read the following sentences

1) Critical Path Method (CPM) is a deterministic approach

2) Program evaluation and review technique (PERT) is the non deterministic approach

3) Time is the most essential and basic variables in PERT system of planning and control

Which one is correct?

1 and 2 are true

1 and 3 are true

2 and 3 are true

1, 2 and 3 are true

17 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Patch repair can be done when structural element have

Minor structural cracks

Major structural cracks

Hair line cracks

Larger size crack

18 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

The layout of distribution system which can be adopted only in well planned locality of cities is

Grid-iron system

Dead end system

Ring system

Radial system

19 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Cost slope is defined as

(Crash cost - normal cost)/(Normal time - crash time)

(Normal cost - crash cost)/(Normal time - crash time)

(Crash cost - normal cost)/(Crash time - normal time)

(Normal cost - crash cost)/(Crash time - normal time)

20 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which of the following works on the principal of anaerobic digestion?

Trickling filter

Oxidation pond

Activated sludge process

Septic tank

21 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which test is not conducted to determine water content of soil?

Sand bath method

Calcium Carbide method

Oven drying method

Water displacement method

22 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

The height of the plinth from the surrounding ground level shall be not less than

400 mm

450 mm

500 mm

550 mm

23 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

While designing road bridges and culverts, which of the following load is not considered?

Dead Load

Live load

Machine load

Snow load

24 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

An intermediate floor between two floors overhanging or overlooking a floor beneath with a minimum clear height of 2.1 metre at the below floor is known as

Basement floor

Mezzanine floor

First floor

Ground floor

25 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Dissolved oxygen in sewage is determined after titration against

Silver nitrate

Sodium thiosulphate

Potassium dichromate

Copper sulphate

26 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which of the following test is not performed on bitumen ?

Viscosity test

Crushing value test

Ductility test

Softening point test

27 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which factor does not affect the design and performance of cement concrete pavement?

Wheel load

Temperature variations at the location of the road

Types of joints and their spacing

Optimum moisture content

28 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which is not a function of transition curves in horizontal alignment of highway?

To introduce gradually the centrifugal force

To provide sufficient sight distance

To enable gradual introduction of designed superelevation

To enable gradual introduction of extra widening of pavement at the start of circular curve

29 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

The operation of levelling across any river is termed as

Profile levelling

Reciprocal levelling

Compound levelling

Fly levelling

30 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

The average speed maintained by vehicle over a particular stretch of road while vehicle is in motion is called

Spot speed

Average speed

Running speed

Travel speed

31 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

The grade of concrete corresponding to nominal mix proportion 1:3:6 is

M25

M20

M15

M10

32 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Read the following sentences in the context of specification

1. Specification describes nature and class of work, materials to be used in the work

2. The cost of work depends on specification

3. General specifications and detailed specifications are types of specification

Which option is correct?

1 and 2 are true

1 and 3 are true

2 and 3 are true

1, 2 and 3 are true

33 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

How many bags of cement are required to prepare M15 cement concrete mix

0.217 bags

6.2 bags

0.1428 bags

4.08 bags

34 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which of the following is True in the case of compaction of soils?

The compactive effort in standard Proctor test is 4.55 times than in modified Proctor test

The compaction of soil is not affected by water content of the soil

10% air-void line and 90% saturation lines are not identical

A well graded soil attains a much lesser dry unit weight than a poorly graded soil

35 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

While surveying, in which of the following object, chaining is obstructed but vision is free?

Hill

Road

Pond

Building

36 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which city is known as walled city in Gujarat?

Surat

Ahmedabad

Vadodara

Bhuj

37 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which statement is correct in relation to permeability of soil?

Greater the void ratio, lesser is the value of coefficient of permeability

Coefficient of permeability increases with the decrease in temperature

Permeability is inversely proportional to the specific surface of particle

The permeability of coarse grained soil is small compared to fine- grained soils

38 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

What will be the back bearing of a line AB if its fore bearing is S 40° W

S 40° W

N 40° W

N 40° E

S 40° E

39 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

In the context of water distribution system, which of the following is also known as tree system?

Ring system

Radial system

Grid iron system

Dead end system

40 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

The test which measures the amount of carbon in organic matter of sewage is

Bio-chemical oxygen demand test

Chemical oxygen demand test

Total solid test

Nitrogen test

41 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

The stone suitable for bridge pier, abutments etc is

Sand stone

Lime stone

Granite

Trap

42 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which is not a objective of road side arboriculture?

To provide shade and pleasant drive to road users

To provide fruit bearing trees and timber

To intercept annoying sound waves and fumes from road surface

To increase strength of road through roots of trees

43 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Read the following factors in context of the design of concrete mix

1. Type and grade of cement

2. Maximum nominal size of aggregates

3. Water-cement ratio

4. Durability

The design of concrete mix is based on which of the above factors?

1, 2 and 3 are required

2, 3 and 4 are required

1, 3 and 4 are required

1, 2, 3 and 4 are required

44 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

The length available between extreme edges of water surface at the highest flood level, measured at right angles to the abutment faces of a bridge is called as

Afflux

Effective span

Linear waterway

Length of bridge

45 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which is not a recent development in construction industry?

Cavity wall construction

Modular Construction

Green building construction

Use of Fibre - reinforced polymers

46 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which one of the following is considered as a limitation of steel structures

Low Dead weight

Corrosion

Low recurring expenses

Good rigidity

47 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

The unit of measurement of damp proof course is

Running meter

Square meter

Cubic metre

Quintal

48 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Read the following sentences for suitability of use of rapid hardening cement

1. Road repair work

2. Prefabricated concrete construction

3. Form work is required to be removed early

Which option is correct?

1 and 2 are true

2 and 3 are true

1 and 3 are true

1, 2 and 3 are true

49 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which is a regulatory sign?

Speed limit sign

Cross-road

Pedestrian crossing

Narrow bridge

50 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which is not a type of engineering contract?

Item rate contract

Lump-sump contract

Plinth area contract

Labour contract

51 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which factor does not affect stopping sight distance?

Reaction time of driver

Speed of vehicle

Frictional resistance between road and tyre

Characteristics of vehicle

52 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which is not a constituent of paint?

Base

Driver

Vehicle

Thinner

53 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Specific gravity of soil can be determined by

Core cutter method

Water displacement method

Pycnometer method

Sand replacement method

54 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Quick setting cement is prepared by

1. Reducing the percentage of gypsum

2. Increasing the percentage of gypsum

3. Fine grinding

Which option is correct?

1,2,3 are True

1,2 are True

2,3 are True

1,3 are True

55 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

The ratio of maximum shear stress to average shear stress in case of a rectangular beam section will be

1.33

1.5

1.67

2.0

56 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

The horizontal member used to support common rafter of a roof when span is large is known as

Valley rafter

Jack rafter

Purlin

Battens

57 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Radius of Mohr's circle of stress represents

Normal Stress

Shear stress

Principal Stress

Maximum Normal Stress

58 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which gas is not available in air pollutants generated through man made sources?

Sulphur dioxide

Nitrogen oxides

Carbon monoxide

Ammonia

59 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which is NOT a historical monument of Gujarat?

Rani Ki Vav

Sun Temple

Archaeological site Lothal

Minakshi Temple

60 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Read the following sentences in relation to compass survey

1. Prismatic compass gives whole circle bearing of a line

2. Surveyor compass gives quadrantal bearing of a line

3. In surveyor's compass, 0° is marked on east and west and 90° is marked at north and south

Which option is correct?

1 and 2 are true

1 and 3 are true

2 and 3 are true

1, 2 and 3 are true

61 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Read the following statements

1. Every course consists of headers and stretchers placed alternatively in double Flemish bond

2. Alternate courses will show either header or stretcher in elevation in single Flemish bond

3. The facing and backing of wall will have different appearance in double Flemish bond

Which option is true?

Statements 1 and 2 are true

Statements 1 and 3 are true

Statements 2 and 3 are true

Statements 1, 2 and 3 are true

62 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Compaction factor test is performed on concrete to determine

Workability

Degree of Compaction

Compressive strength

Setting time

63 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Read the following sentences in term of deduction of opening in estimation of quantity of plastering

1. No deductions shall be made for ends of beam, posts rafter etc

2. For opening up to 0.5 sqm, no deduction is made

3. For opening above 3 sqm, deduction is made for one face of the opening only

Which option is correct?

1 and 2 are true

1 and 3 are true

2 and 3 are true

1, 2 and 3 are true

64 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which is not a property of hardened concrete?

Strength

Durability

Workability

Dimensional stability

65 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which one will be designated as standard concrete?

M15

M20

M25

M60

66 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

The height of all rooms for human habitation measured from the surface of the floor to the lowest point of the ceiling (bottom of slab) shall not be less than

3.25 m

2.50 m

2.75 m

3.00 m

67 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

As per principle of building planning, bed room in a residential building should have an aspect of

West or North-west

South or south-west

North

North-east

68 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which type of cracks indicates the development of tension in concrete?

Medium crack

D-cracking

Isolation crack

Crazing

69 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

The number of bricks required in one cubic metre of masonry work?

100

1000

500

5000

70 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Soil stabilization is done

1. To increase shear strength of soil

2. To reduce compressibility of soil

3. To increase the bearing capacity of foundation soils

Which option is correct?

1 and 2 are true

1 and 3 are true

2 and 3 are true

1, 2 and 3 are true

71 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Slope provided to the road surface in transverse direction to drain off rain water is called as

Camber

Gradient

Superelevation

Skid resistance

72 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

A digital representation of physical and functional characteristics of a buildings and other physical assets is called

Perspective drawing

Isometric drawing

Building information modelling

Technical drawing

73 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which of the following is not used as coagulant in water treatment process?

Copper sulphate

Alum

Sodium Aluminate

Chlorinated copperas

74 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which test is not conducted on bitumen?

Viscosity test

Abrasion test

Softening point test

Penetration test

75 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

P = Normal load, A = cross-sectional area, M = moment and I = moment of inertia and y = perpendicular distance to neutral axis the expression to calculate combined direct and bending stress is

P/A + (I/M)y

P/A + (M/I)y

A/P + (I/M)y

A/P + (M/I)y

76 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which is not required to prepare estimate of a construction work?

Drawings (Plan and section)

Specifications

Rates

Construction material

77 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which has maximum value of passenger car unit (PCU) recommended by IRC for urban roads

Auto rickshaw

Bus

Motor cycle

Light commercial vehicle

78 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

The survey conducted to determine the boundaries of fields, estates, houses etc is known as

Topographical survey

Cadastral survey

City survey

Engineering survey

79 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

The shape of aggregate that gives maximum strength is

Flaky aggregate

Elongated aggregate

Rounded aggregate

Cubical aggregate

80 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which one is not a method of disinfection of water?

By use of excessive lime

By use of potassium chromate

By use of ozone

By use of iodine and bromine

81 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

The basic wind velocity required for design of steel structure is referenced from

IS: 875 (Part-1)

IS: 875 (Part-2)

IS: 875 (Part-3)

IS: 875 (Part-4)

82 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

The monument "Adalaj Ni Vav" is a structure of which category?

Pond

Stepwell

Bore well

Reservoir

83 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

As per Indian Road Congress (IRC) the maximum value of super elevation in plain and rolling terrain is

10%

84 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which of these is an external source of dampness?

Precipitation

Condensation

Construction moisture

Leak in the services

85 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Read the following statements in connection of bearing capacity of soil

1. When water table is located at a depth equal or greater than width of foundation, the bearing capacity is not affected

2. When water table is located at a depth equal or greater than width of foundation, the bearing capacity is reduced

3. When the water table is located at the level of the base of the footing or below it, the surcharge term is not affected in the Terzaghi's bearing capacity formula

Which option is correct?

1 and 3 are true

1 and 2 are true

2 and 3 are true

1, 2 and 3 are true

86 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

The nominal mix generally used for water retaining structure is

1:1:2

1:1.5:3

1:1.5:4

1:2:4

87 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which is not a method of plane table surveying?

Traversing

Radiation

Intersection

Bisection

88 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Read the statement in relation of quality and treatment of water

1. The residual chlorine in water is determined by Starch-Iodide test

2. Hardness in water is determined by Versenate method

3. The permissible limit of chlorides in water is 300 ppm

Which option is correct?

1 and 2 are true

1 and 3 are true

2 and 3 are true

1, 2 and 3 are true

89 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

In case of stair, a vertical member supporting the hand rail is known as

Baluster

String

Waist

Riser

90 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which of the following is known as slow test?

Consolidated-drained test

Consolidated-undrained test

Unconsolidated-undrained test

Unconsolidated test

91 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which one of the following is a deep foundation?

Strip footing

Grillage foundation

Raft foundation

Pile foundation

92 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which one of the following will be considered as live load in design of a structure?

Wall load

Snow load

Furniture load

Wind load

93 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

If V is speed in metres per second and R is the radius of curve and C is rate of change of radial acceleration in metre per second cube the length of transition curve can be given by

V³/CR

V²/CR

V/CR

CR/V³

94 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which is NOT followed/required to obtain the high-performance concrete?

Improved aggregate-matrix bond

Reduced porosity

Increase in water-cement ratio

Improved compaction

95 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

The portion of brick obtained by cutting a brick lengthwise into two pieces is known as

King Closer

Queen closer

Bevelled closer

Mitred closer

96 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Which is NOT a rule to compute boundary area?

Trapezoidal rule

Mid-ordinate rule

Average ordinate rule

Rectangle rule

97 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Read the following sentences in the context of contour

1. When higher values of elevations are inside the loop, it indicates hill

2. The horizontal distance between two consecutive contours is termed as horizontal interval

3. When lower values of elevations are inside the loop, it indicates pond

Which option is correct?

1 and 2 are true

2 and 3 are true

1 and 3 are true

1, 2 and 3 are true

98 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

The permissible limit of 5 days BOD for industrial waste, which can be discharged into public sewer is

250 mg/l

500 mg/1

750 mg/l

1000 mg/l

99 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

Permissible Ground Coverage for Building-units with area more than 500 sq-metre and up to 1500 sq-metre is

The entire area of the building unit after keeping require margin, common plot, setback, parking.

Up to maximum 60% of the entire building-unit area.

Up to maximum 65% of the entire building-unit area.

Up to maximum 75% of the entire building-unit area.

100 / 100

Category: AMC Sahayak Technical Supervisor, Advt. No. - 28/202324 (Exam Date : 18/08/2024)

In the healthful residential environment the noise level should be kept in the range of

40-50 decibels

50-60 decibels

60-70 decibels

70-80 decibels

Your score is

The average score is 21%

"Rate This Test"

"Thank You"

Leaderboard

Pos.	Name	Score	Duration
1	K	94 %	7 minutes 23 seconds
2	Hh	92 %	22 minutes 23 seconds
3	Ja	83 %	8 minutes 52 seconds
4	1234	75 %	18 minutes 25 seconds
5	1234	72 %	31 minutes 41 seconds
6	123	69 %	25 minutes 2 seconds
7	M.k bajak	56 %	28 minutes 36 seconds
8	Rock	54 %	28 minutes 20 seconds
9	M K	46 %	54 minutes 45 seconds
10	Vipul sunesara	26 %	50 minutes 12 seconds
11	Kaminikumari bakulbhai chaudhari	25 %	1 hours 14 minutes 17 seconds
12	Rohit	23 %	18 minutes 26 seconds
13	Mahendra T.	20 %	2 minutes 4 seconds
14	BR	7 %	7 minutes 25 seconds
15	Neha Chaudhari	5 %	6 minutes 39 seconds
16	R K	4 %	1 minutes 36 seconds
17	Yuvraj	1 %	38 seconds
18	Guest	0 %	0 second
19	Guest	0 %	0 second
20	Er. Mr. M. V.	0 %	0 second
21	Guest	0 %	0 second
22	Guest	0 %	0 second
23	Guest	0 %	0 second
24	Guest	0 %	0 second
25	Guest	0 %	0 second
26	Guest	0 %	0 second
27	Guest	0 %	0 second
28	Guest	0 %	0 second
29	Guest	0 %	0 second
30	Guest	0 %	0 second
31	Guest	0 %	0 second
32	Guest	0 %	0 second
33	Guest	0 %	0 second
34	Guest	0 %	0 second
35	Guest	0 %	0 second
36	Guest	0 %	0 second

AMC Sahayak Technical Supervisor Old Paper Test 2024

"Time Finish"

---------------

Your Name

"Rate This Test"

"Thank You"

Related Posts:

Latest Recruitment

Report a question

"Time Finish"

---------------

Your Name

"Rate This Test"

"Thank You"

Related Posts: