1 votes, 5 avg

Free Steel Design Test 1

-: Symbols & Description :-

(નિશાનીઓ અને તેનું વર્ણન)

-: Instructions :-

(સૂચનાઓ)

1. Click On Full Screen Mode (¤) From Corner For Best Test Experience

(બેસ્ટ ટેસ્ટ અનુભવ માટે ખૂણામાં આપેલ ફૂલ સ્ક્રીન મોડ (¤) ઉપર ક્લિક કરો)

2. Use Navigation Bar For Jumping Forward or Backward To Any Question

(કોઈ પણ પ્રશ્ન ઉપર જવા માટે નેવિગેશન બારનો ઉપયોગ કરવો)

3. Submit Test Button Will Be Only Visible At The Last Question

(ટેસ્ટ સબમિટ કરવાનો ઓપ્શન માત્ર છેલ્લા પ્રશ્ન ઉપર હશે)

4. Don't Forget To Give Your Rating & Review At The End Of Test

(ટેસ્ટ પૂરી થયા પછી રેટિંગ & રિવ્યુ આપવાનું ભુલશો નહીં)

"BEST OF LUCK"

[Click On Full Screen Mode (¤) From Corner For Best Test Experience]

(બેસ્ટ ટેસ્ટ અનુભવ માટે ખૂણામાં આપેલ ફૂલ સ્ક્રીન મોડ (¤) ઉપર ક્લિક કરો)

---------------

Your Name

1 / 10

Category: Class 3 Steel design

Maximum pitch distance ______.

16 x thickness of thinner plate

20 x thickness of thinner plate

40 x thickness of thinner plate

32 x thickness of thinner plate

2 / 10

Category: Class 3 Steel design

The beam that transfer the floor loading to the main beams are called ____

Secondary beams

Joints

Both A & B

None of the Above

3 / 10

Category: Class 3 Steel design

Two plates 8 mm and 12 mm are lap jointed. The maximum size of fillet weld is ,

8 mm

12 mm

6.5 mm

10.5 mm

4 / 10

Category: Class 3 Steel design

Minimum End return of weld is

2 x size of weld

3 x size of weld

2.5 x size of weld

4 x size of weld

5 / 10

Category: Class 3 Steel design

Value for ε for Fy-250

0.33

0.77

0.50

6 / 10

Category: Class 3 Steel design

The imperfection factor α for buckling class ‘b’ is

0.21

0.34

0.49

0.76

7 / 10

Category: Class 3 Steel design

The minimum size of fillet weld should _______

Not be less than 3mm

Be less than 3mm

Be less than 2mm

Greater than thickness of thinner part joined

8 / 10

Category: Class 3 Steel design

The maximum spacing of tacking fastners shall not exceed

300 mm

600 mm

1000 mm

500 mm

9 / 10

Category: Class 3 Steel design

The slenderness ratio of lacing should not exceed

180

145

200

140

10 / 10

Category: Class 3 Steel design

Chrome and Nickel are added to Steel to improve _________

corrosion resistance and high temperature resistance

strength

ductility

weldability

Your score is

The average score is 50%

"Rate This Test"

"Thank You"

Leaderboard :

Pos.	Name	Score	Duration
1	Atul Sharma	100 %	25 seconds
2	j	100 %	29 seconds
3	Kp	100 %	30 seconds
4	V	100 %	36 seconds
5	Mitul Gohil	90 %	24 seconds
6	Jay Shah	90 %	25 seconds
7	Himali	90 %	37 seconds
8	D	90 %	1 minutes 6 seconds
9	Ok	90 %	1 minutes 6 seconds
10	MrH	90 %	1 minutes 12 seconds
11	Sweta Jadeja	80 %	23 seconds
12	M R	80 %	49 seconds
13	Palanpur Banaskantha	80 %	1 minutes 46 seconds
14	Tushar	80 %	1 minutes 59 seconds
15	HB	80 %	2 minutes
16	Kp	80 %	2 minutes 41 seconds
17	Ab	80 %	4 minutes 55 seconds
18	Jigar Makwana	70 %	17 seconds
19	Yogi	70 %	21 seconds
20	Uuu	70 %	1 minutes 30 seconds
21	Sp	70 %	1 minutes 35 seconds
22	Kp	70 %	2 minutes 8 seconds
23	Rahul	70 %	2 minutes 24 seconds
24	S	70 %	2 minutes 27 seconds
25	Nakum	70 %	3 minutes 8 seconds
26	Hgggg	70 %	3 minutes 29 seconds
27	Y	60 %	1 minutes 25 seconds
28	Jigar Barot	60 %	1 minutes 31 seconds
29	R	60 %	1 minutes 47 seconds
30	Arth	60 %	2 minutes 22 seconds
31	Vipul chaudhari	60 %	2 minutes 48 seconds
32	Binal Jayeshbhai Patel	60 %	3 minutes 2 seconds
33	Mayur Chaudhari	60 %	3 minutes 29 seconds
34	V	50 %	1 minutes 6 seconds
35	Siddharth Chaudhari	50 %	1 minutes 9 seconds
36	Sneh	50 %	1 minutes 28 seconds
37	Np	50 %	1 minutes 37 seconds
38	dj	50 %	1 minutes 53 seconds
39	j	50 %	2 minutes
40	Hh	50 %	2 minutes
41	3	50 %	2 minutes 1 seconds
42	Naran Prajapati	50 %	2 minutes 2 seconds
43	V	50 %	2 minutes 6 seconds
44	bhoomi	50 %	2 minutes 37 seconds
45	R1	50 %	4 minutes 54 seconds
46	P	40 %	1 minutes 10 seconds
47	Umang	40 %	1 minutes 19 seconds
48	i	40 %	1 minutes 48 seconds
49	Krupa	40 %	1 minutes 50 seconds
50	O	40 %	2 minutes 1 seconds
51	X	40 %	2 minutes 21 seconds
52	Manoj	40 %	2 minutes 33 seconds
53	Harsh Makwana	40 %	2 minutes 44 seconds
54	Neha Chaudhari	40 %	2 minutes 58 seconds
55	D	40 %	3 minutes 46 seconds
56	Hiranmoyi Borah	40 %	5 minutes 59 seconds
57	Sagarkumar Pranami	30 %	1 minutes 3 seconds
58	Ff	30 %	1 minutes 8 seconds
59	Urmila solanki	30 %	1 minutes 33 seconds
60	Sanjay Patel	30 %	2 minutes 11 seconds
61	A	30 %	4 minutes 4 seconds
62	Jay	30 %	4 minutes 24 seconds
63	Divyeshbhai Vasava	20 %	41 seconds
64	H G	20 %	51 seconds
65	H G	20 %	1 minutes 12 seconds
66	Veje	20 %	1 minutes 27 seconds
67	Digen Patel	20 %	1 minutes 46 seconds
68	H	20 %	1 minutes 48 seconds
69	D	20 %	2 minutes 6 seconds
70	Q	20 %	7 minutes 15 seconds
71	M	10 %	1 minutes 2 seconds
72	1234	10 %	1 minutes 52 seconds
73	Hiranmoyi	10 %	2 minutes 4 seconds
74	H G	0 %	0 second
75	Guest	0 %	0 second
76	Guest	0 %	0 second
77	Guest	0 %	0 second
78	Naran Prajapati	0 %	20 seconds
79	fbs	0 %	1 minutes 16 seconds

Free Steel Design Test 1

"Time Finish"

---------------

Your Name

"Rate This Test"

"Thank You"

Leaderboard :

Related Posts:

Report a question

"Time Finish"

---------------

Your Name

"Rate This Test"

"Thank You"

Leaderboard :

Related Posts: