Waste Water Technology Online Test 1 (Free)

Report a question

You cannot submit an empty report. Please add some details.
0 votes, 0 avg
13

Waste Water Technology Online Test 1 (Free)

-: Symbols & Description :-

(નિશાનીઓ અને તેનું વર્ણન)

 

-: Instructions :-

(સૂચનાઓ)

 

1. Click On Full Screen Mode (¤) From Corner For Best Test Experience

(બેસ્ટ ટેસ્ટ અનુભવ માટે ખૂણામાં આપેલ ફૂલ સ્ક્રીન મોડ (¤) ઉપર ક્લિક કરો)

2. Use Navigation Bar For Jumping Forward or Backward To Any Question

(કોઈ પણ પ્રશ્ન ઉપર જવા માટે નેવિગેશન બારનો ઉપયોગ કરવો)

3. Submit Test Button Will Be Only Visible At The Last Question

(ટેસ્ટ સબમિટ કરવાનો ઓપ્શન માત્ર છેલ્લા પ્રશ્ન ઉપર હશે)

4. Don't Forget To Give Your Rating & Review At The End Of Test

(ટેસ્ટ પૂરી થયા પછી રેટિંગ & રિવ્યુ આપવાનું ભુલશો નહીં)

 

"BEST OF LUCK"

[Click On Full Screen Mode (¤) From Corner For Best Test Experience]

(બેસ્ટ ટેસ્ટ અનુભવ માટે ખૂણામાં આપેલ ફૂલ સ્ક્રીન મોડ (¤) ઉપર ક્લિક કરો)

---------------

Your Name

1 / 10

Category: Sanitation System (Environmental Engineering)

Into how many types, the water carriage system is divided?

2 / 10

Category: Maintenance of Sewage System (Environmental Engineering)

Explosion inside the sewer due to improper ventilation of the explosive gases inside the sewer is a causes of____

3 / 10

Category: Drains And Sewers (Environmental Engineering)

What are the masonry chambers constructed at suitable intervals along sewer lines called?

4 / 10

Category: Sanitation System (Environmental Engineering)

Normally, the amount of water required for flushing operation is _____ litres.

5 / 10

Category: Sewage Treatment And Disposal (Environmental Engineering)

The color of the secondary sludge produced from the high rate trickling filter is ___________

6 / 10

Category: Sewage Treatment And Disposal (Environmental Engineering)

Which of the following device is used for the removal of oil and grease?

7 / 10

Category: Drains And Sewers (Environmental Engineering)

In which sewer joint, bituminous compounds are added?

8 / 10

Category: Sewage Treatment And Disposal (Environmental Engineering)

The minimum design depth of oxidation pond is ___________

9 / 10

Category: Drains And Sewers (Environmental Engineering)

Which sewer is also called as submain sewer?

10 / 10

Category: Maintenance of Sewage System (Environmental Engineering)

which are the  cause of troubles and odor?

Your score is

The average score is 41%

0%

"Rate This Test"

"Thank You"

Leaderboard :


Pos.NameScoreDuration
1Neha Chaudhari80 %1 minutes 50 seconds
2Mitesh Patel70 %3 minutes
3Ysysgsgsgs60 %2 minutes 9 seconds
4Su60 %2 minutes 12 seconds
5Nikhil60 %2 minutes 32 seconds
6Ab60 %4 minutes 27 seconds
7Hm50 %1 minutes 34 seconds
8Jigar Chauhan50 %2 minutes 6 seconds
9P40 %1 minutes 57 seconds
10.30 %1 minutes 16 seconds
11Neha Chaudhari30 %2 minutes 27 seconds
12Pradip20 %2 minutes 19 seconds
13Nikhil10 %26 seconds
14Guest0 %0 second
15Er. Mr. M. V.0 %0 second
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments