Irrigation Engineering Mcqs

Practice Quiz On Irrigation Engineering Mcqs

30 Marks

1 / 30

In a canal syphon, the flow is

Under atmospheric pressure

Pipe flow

With critical velocity

Under negative pressure

2 / 30

A deficit of sediments in flowing water may cause a river

Meandering type

Aggrading type

Degrading type

Sub-critical type

3 / 30

What is the crop ratio of Kharif to rabi crops?

2:1

1:2

1:3

3:1

4 / 30

A river training work is generally required when the river is

Meandering

Aggrading

Degrading

All the above

5 / 30

Irrigation canals are generally aligned along

Contour line

Valley line

Straight line

Ridge line

6 / 30

Useful soil moisture for plant growth, is

Gravity water

Capillary water

Hygroscopic water

Chemical water

7 / 30

Which of the following is the other name of perennial irrigation system?

Flood Irrigation

Controlled Irrigation

Direct Irrigation

Storage Irrigation

8 / 30

The depth of rice root zone, is

50 cm

60 cm

80 cm

90 cm

9 / 30

What is the time interval between two consecutive watering called?

Crop Period

Period

Base Period

Rotation Period

10 / 30

In a barrage, the crest level is kept

Low with large gates

High with large gates

High with no gates

Low with no gates

11 / 30

Which factor doesn’t influence the root zone depth?

Type of soil

Type of crops grown

Sub-soil formation

The yield of the crop

12 / 30

At which point in the entire canal system the duty of water will be more?

Head of the Water-course

Head of the Minor

Head of the Distributary

Head of the Branch

13 / 30

The structure constructed to allow drainage water to flow under pressure through an inverted syphon below a canal, is called

Syphon

Super passage

Super-aqueduct

Syphon aqueduct

14 / 30

In which of the following types of irrigation systems hydroelectric power can be generated?

Storage Irrigation

Perennial Irrigation

Flood Irrigation

Lift Irrigation

15 / 30

Bed bars in a canal are provided

To watch the general behavior of canal

To measure the discharge

To raise the supply level

To control the silting

16 / 30

Cross regulators in main canals are provided

To regulate water supply in the distributaries

To increase water head upstream when a main canal is running with low supplies

To overflow excessive flow water

None of these

17 / 30

The ratio of the rate of change of discharge of an outlet and parent channel, is known as

Efficiency

Sensitivity

Flexibility

Modular limit

18 / 30

Which of the following CD works carry drainage over the canal?

Aqueduct and Syphon Aqueduct

Super passage and Syphon

Level-crossing and inlets outlets

Canal Syphon and Aqueduct

19 / 30

In Montague type fall

A straight glacis is provided

A circular glacis is provided

A parabolic glacis is provided

No glacis is provided

20 / 30

The intensity of irrigation means

Percentage of culturable commanded area to be irrigated annually

Percentage of gross commanded area to be irrigated annually

Percentage of the mean of culturable commanded area and the gross commanded area to be irrigated annually

Total depth of water supplied by the number of waterings

21 / 30

Process of meandering is due to

Sediment load of streams

Discharge and hydraulic properties of streams

Relative erodibility of the bed and banks

All the above

22 / 30

The main function of a diversion head works of a canal from a river, is

To remove silt

To control floods

To store water

To raise water level

23 / 30

The first watering before sowing the crop is

paleo

kor

delta

flooding

24 / 30

In a Sarda type fall, the rectangular crest, may be used for discharge up to

6 cumecs

10 cumecs

14 cumecs

20 cumecs

25 / 30

What is water conveyance efficiency?

The ratio of water used beneficially and the water delivered to the field

The ratio of water stored in the root zone and the water delivered to the field

The ratio of the quantity of water delivered to the field and quantity of water pumped into the canal

The ratio of water stored in the root zone and the water needed before irrigation

26 / 30

An irrigation project is classified as a major project when the CCA involved in the project is more than ______

2500 hectares

10000 hectares

2000 hectares

5000 hectares

27 / 30

If water table is comparatively high, the irrigation canal becomes useless, due to

Large amount of seepage

Water logging of the cultivated areas

Uncertain water demand

All the above

28 / 30

Borrow pits should preferably be located in

Field on the left side of the canal

Field on the right side of the canal

Fields on both sides of the canal

Central half width of the section of the canal

29 / 30

Which one below is an example of the overlapping crop?

Tobacco

Wheat

Millets

Sugarcane

30 / 30

What is the Annual Intensity of irrigation (AII)?

Cultivable Command Area/Gross Irrigated Area

Net Irrigated Area/Cultivable Command Area

Cultivable Command Area/Net Irrigated Area

Gross Irrigated Area/Cultivable Command Area

Your score is

The depth of rice root zone, is

A) 50 cm

B) 60 cm

C) 80 cm

D) 90 cm

The intensity of irrigation means

A) Percentage of culturable commanded area to be irrigated annually

B) Percentage of gross commanded area to be irrigated annually

C) Percentage of the mean of culturable commanded area and the gross commanded area to be irrigated annually

D) Total depth of water supplied by the number of waterings

A) Percentage of culturable commanded area to be irrigated annually

The main function of a diversion head works of a canal from a river, is

A) To remove silt

B) To control floods

C) To store water

D) To raise water level

Useful soil moisture for plant growth, is

A) Gravity water

B) Capillary water

C) Hygroscopic water

D) Chemical water

B) Capillary water

A river training work is generally required when the river is

A) Meandering

B) Aggrading

C) Degrading

D) All the above

A) Meandering

Which of the following is the other name of perennial irrigation system?

A) Flood Irrigation

B) Controlled Irrigation

C) Direct Irrigation

D) Storage Irrigation

B) Controlled Irrigation

What is the Annual Intensity of irrigation (AII)?

A) Cultivable Command Area/Gross Irrigated Area

B) Net Irrigated Area/Cultivable Command Area

C) Cultivable Command Area/Net Irrigated Area

D) Gross Irrigated Area/Cultivable Command Area

An irrigation project is classified as a major project when the CCA involved in the project is more than ______

A) 2500 hectares

B) 10000 hectares

C) 2000 hectares

D) 5000 hectares

B) 10000 hectares

In which of the following types of irrigation systems hydroelectric power can be generated?

A) Storage Irrigation

B) Perennial Irrigation

C) Flood Irrigation

D) Lift Irrigation

A) Storage Irrigation

The first watering before sowing the crop is

A) paleo

B) kor

C) delta

D) flooding

A) paleo

Click Here to View All Civil Engineering Mcqs With Practice Quiz

Also Join Our Telegram Group For Daily Civil Engineering Practice Quiz

Pages: 1 2 3

Irrigation Engineering Mcqs

Related Posts:

Latest Recruitment